Selden Diamond Brite Low Maintenance Wet Look Floor Polish 5 Ltr

Manufacturer: Selden

Easy to use - no burnishing required. Maximum scuff resistance. Low maintenance requirement. •Dries to a wet look gloss. •Protects and prolongs the life of flooring materials.

SKU: STAA9015
Current rating is 0.00. Total votes 0.
Bookmark and Share

Application:   For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminated flooring.

Directions:   Diamond Brite must be applied to a clean dry floor. If required strip old polish with Selate or Selstrip. Apply a thin even film using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). Additional coats enhance the finish. May be readily maintained with Selsheen or Fastlane. Coverage rate: 60 square metres per litre.

Technical
Composition:   An advanced blend of styrene/acrylic polymer, wax, wetting agents, film-forming agents and preservative in a water based emulsion form incorporating metal cross linking additives.
Appearance:    Thin, translucent emulsion
Colour:    White
Viscosity:    <10cps
Density:    1.039
pH:    8.6
Activity:    25%
Fragrance:    Characteristic slightly sweet
Stability:    Two years minimum in unopened container

Biodegradability:  All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.

Storage:  Protect from freezing

Flashpoint >100



Product is for professional use only.

Product reviewsProduct SpecificationsDownloads